> For the complete documentation index, see [llms.txt](https://documentation.hak5.org/lan-turtle-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://documentation.hak5.org/lan-turtle-hub/getting-started/lan-turtle-hub-basics.md).

# LAN Turtle Hub Basics

## Ports and Features

### Status LED

On the front of the LAN Turtle Hub is the multi-color status LED.  This LED reflects system status, and can be customized by payloads.

LED status modes:

* Blinking green\
  The LAN Turtle Hub is booting.  The first time the LAN Turtle Hub boots will take several minutes while it configures the internal storage and generates unique device keys.\
  Future power-ups will take significantly less time.
* Blinking magenta\
  The LAN Turtle Hub is in first-time setup mode; connect to <http://172.16.84.1:1471> to start!
* Blinking blue\
  The LAN Turtle Hub has finished booting and is operational; connect to <http://172.16.84.1:1471> or connect via SSH to `172.16.84.1`.

The default LED color can be changed or disabled in the system settings panel in the web UI.

### Power

The LAN Turtle Hub is powered via the USB-C cable.

### USB-C Ethernet

The USB-C cable provides a USB-C Ethernet adapter.  This is used to configure the LAN Turtle Hub and to provide networking to the target system.

Connect the LAN Turtle Hub to target systems via USB-C.  A USB-C to USB-A adapter can be used for legacy target devices which lack a USB-C port.

The LAN Turtle Hub will provide an IP to the target system via DHCP, and will provide network and Internet access if plugged into an Ethernet network via the RJ-45 port.

### RJ45 Ethernet

The RJ45 Ethernet port is used to connect the LAN Turtle Hub and connected devices on the USB-C cable.

Plug the LAN Turtle Hub into an Ethernet network as you would a USB network adapter.

### Reset Button

On the back of the LAN Turtle Hub (the opposite side from the status LED) is a recessed button.

This button can be used to trigger recovery and factory reset.

Use a thin metal tool such as a paperclip, SIM popper, or earring to press the button.

### USB Ports

The LAN Turtle Hub has three USB-A ports.

#### USB Hub Ports

The two ports closest to the RJ45 Ethernet port act as a standard USB hub.  They will be connected to the target device on the USB-C cable.

#### Dynamic USB Port

The USB port closest to the USB-C cable can be controlled via the LAN Turtle Hub.  By default, it is connected to the LAN Turtle Hub itself.

The dynamic USB port can be assigned to the target device or the LAN Turtle Hub on demand.
