> For the complete documentation index, see [llms.txt](https://documentation.hak5.org/packet-squirrel-mark-ii/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://documentation.hak5.org/packet-squirrel-mark-ii/getting-started/running-payloads.md).

# Running payloads

## Mode switch

<figure><img src="/files/2BmHHf5uGfcKgZbslOfj" alt=""><figcaption><p>Packet Squirrel mode switch</p></figcaption></figure>

The Mode Switch determines what payload will be run.

*On boot* the Packet Squirrel will run the selected payload, or enter Arming Mode.

## Selected at boot

The payload is selected when the Packet Squirrel boots.

Changing the position of the Mode Switch will not change payloads until you reboot.

## Quick rebooting&#x20;

Reboot the Packet Squirrel automatically by holding down the pushbutton at the top of the device for 5-10 seconds.

Alternately, you can simply unplug the Packet Squirrel and plug it in again to reboot it.